Airsoft Aiming Laser & Weapon Light

SomoGear builds airsoft aiming lasers, IR illuminators, weapon lights, and helmet lights for night vision users, airsoft players, and realistic field training.

Why SomoGear?

SomoGear focuses on realistic airsoft tactical devices with practical beam performance, durable housings, rail-compatible mounting, and field-oriented product design. Our products are built for airsoft, milsim, night vision training, and tactical-style outdoor use.

SomoGear Common Questions

Find quick answers about SomoGear products, mounting, laser visibility, recoil rating, and night vision use.

SomoGear laser devices are designed for airsoft, milsim, and tactical training use. Some models are built to withstand 5.56 recoil, but users should always check the product page for specific recoil-rating details before use.

The main functions and output power are the same. The differences are mainly in the battery cap, exterior design, and activation button configuration. Please note that the Non-UHP version does not include VIS-HI mode. (means without Visible High Power)

The visible laser beam is easier to see in outdoor, humid, dusty, or foggy environments. In clean indoor air, you may only see the laser dot.

Yes. SomoGear units are shipped in sealed condition. Unsealed units are not offered as standard products.

You can find troubleshooting guides in the Top menu Resources section, including NGAL, PEQ-15, PEQ-2A, and PEQ-16B guides.

For the aiming laser mount, SomoGear recommends around 20 in-lbs / 2.3 Nm with blue Loctite. For the switch mount, SomoGear recommends around 4.5 in-lbs / 0.5 Nm.

To the naked eye, a green laser usually appears brighter than a red laser at the same power level. Under night vision devices, both may appear similar depending on the environment and device settings.

Somogear aiming laser power comprasion chart under NVG and naked eye

It depends on the version. Flashlight versions do not have co-aligned visible and IR lasers. IR illuminator versions with co-aligned VIS and IR aiming lasers are designed to keep the offset within about 10 cm at 30 yards.

SomoGear does not announce new products until they are ready to ship. Product ideas and suggestions are welcome through the contact page or by email at support@somogear.com.

Potting is typically done directly into a plastic or metal housing designed to hold a PCB. The process allows the potting compound to be properly dispensed and degassed through pouring, resulting in better protection. PCB potting services help protect electronic assemblies against physical stress, thermal shock, chemical exposure, heat, and humidity.
SomoGear PCB Potting Process